1. All Products
  2. New Products
221 results
Sort by:
Show per page
  • FDRHSECHN U SLTS W/RCKTRP4 CHN

    Part number COM84179639

    FDRHSECHN U SLTS W/RCKTRP4 CHN

    SOLD OUT for Harvest 2020!

    Case IH 7120, 7230, 7240,8120, 8230, 8240,9120, 9230, 9240 OEM #: 87646015, 84179639

    $1,831.95
    Add to Wish List
  • RET GRN ELEV CHN155LINKS

    Part number COMAH148021

    RET GRN ELEV CHN155LINKS

    John Deere 9650STS, 9660STS, 9750STS, 9760STS, 9860STS OEM #: AH148021

    $236.69
    Add to Wish List
  • CLN GRN ELEV CHN 144-LINKS

    Part number COMAH162059

    CLN GRN ELEV CHN 144-LINKS

    John Deere 9450, 9550, 9550SH, 9560, 9560SH, 9560STS, 9650, 9650STS, 9650CTS, 9660, 9660STS, 9750STS, 9760STS, 9860STS OEM #: AXE28559, AH162059

    $533.83
    Add to Wish List
  • SPROCKET UP FEED HOUSE CENT

    Part number COMH159616

    SPROCKET UP FEED HOUSE CENT

    John Deere 9560STS, 9570STS, 9650STS, 9660STS, 9670STS (BSN 730100), 9750STS, 9760STS, 9770STS (BSN 730100), 9860STS, 9870STS (BSN 730100) OEM #: H159616

    $60.00
    Add to Wish List
  • BLADE STRAW CHOPPER STATIONARY

    Part number COMH215004

    BLADE STRAW CHOPPER STATIONARY

    SOLD OUT for Harvest 2020!

    John Deere 9400, 9410, 9450, 9500, 9510, 9550, 9560, CTS, CTSII, 9650CTS, 9660CTS, 9600, 9610, 9650, 9660, 9560STS, 9760STS, 9860STS, 9650STS to s/n 700500, 9750STS to s/n 700600 , 9650STS s/n 700501 & up, 9750STS s/n 700601 & up, 9570STS, 9670STS, 9770STS, 9870STS, S550, S650, S660, S670, S680, S690 OEM #: H142141, H215004

    $8.37
    Add to Wish List
  • CURV STRW CHOPPER KNIFE SET/8

    Part number COMAH205909

    CURV STRW CHOPPER KNIFE SET/8

    John Deere 9500, 9500SH, 9510, 9510SH, 9550, 9550SH, 9560, 9560SH, 9560STS, 9600, 9610, 9650, 9650CTS, 9650STS, 9660, 9660CTS, 9660STS, 9750STS, 9760STS, 9860STS OEM #: AH203131, AH205909

    $92.74
    Add to Wish List
  • CURV STRW CHOPPER KNIFE SET/8

    Part number COMAH225937

    CURV STRW CHOPPER KNIFE SET/8

    John Deere 9670STS, 9770STS, 9870STS, S690 OEM #: AH225939, AH225937

    $126.36
    Add to Wish List
  • 19MM KNIFE BUSHING

    Part number COMH156101

    19MM KNIFE BUSHING

    John Deere 9500, 9510, 9550, 9560, CTS, CTSII, 9600, 9610, 9650, 9660, 9650CTS, 9660CTS, 9650STS, 9660STS, 9750STS, 9760STS, 9860STS OEM #: H156101

    $2.49
    Add to Wish List
  • 19MM KNIFE BUSHING

    Part number COMH167127

    19MM KNIFE BUSHING

    John Deere 9500, 9500SH, 9510, 9510SH, 9550, 9550SH, 9560, 9560SH, John Deere 9560STS, 9600, 9610, 9650, 9650CTS, 9650STS, 9660, 9660CTS, 9660STS, 9750STS, 9760STS, 9860STS OEM #: H173055, H167127

    $8.81
    Add to Wish List
  • CHOPPER BLADE STR 20MM HOLE

    Part number COM87318316

    CHOPPER BLADE STR 20MM HOLE

    New Holland CR9060, CR9070, CR9080, CR9090, CR7.90, CR8.90, CR9.90, CR10.90 OEM #: 87318316

    $15.20
    Add to Wish List
  • STATIONARY CHOPPER KNIFE

    Part number COM84437640

    STATIONARY CHOPPER KNIFE

    New Holland CR940, CR960, CR970, CR980, CR9060, CR9070 OEM #: 84437640

    $9.29
    Add to Wish List
  • STRAW CHOPPER KNIFE (RH)

    Part number COM87384920

    STRAW CHOPPER KNIFE (RH)

    Sold per each

    New Holland CR9040, CR9060,CR9070, CR9080, CX8070, CX8080, CX8090 OEM #: 87384920

    $25.91
    Add to Wish List
  • CNH DRUM

    Part number TDR350X1984

    CNH DRUM

    What is a Turbodrum? Turbodrum is a heavy duty, high-capacity, retrofit feed drum for draper headers to replace the existing, standard feeder drum on draper heads. It comes complete with all internal components fully welded and assembled, ready to go. Just pull out your existing feed drum, then slip-in and install a Turbodrum - it’s that easy. Turbodrum is an instant fix to problems such as slow harvest speeds in bulky crops, and even worse, blockages and breakdowns caused by the standard feed drum. Turbodrum allows you to go faster and get the crop off in less time at less cost. It feeds better and it’s reliable. Fitting the Turbodrum is quicker than fixing your original. Increase performance and efficiency and reduce loss of crop value.

    KEY FEATURES
    • More than double the number of retractable fingers with a far more aggressive pattern. It literally grabs the crop and pulls it through in a constant and steady flow so the load to the rotor/drum can be optimal. This in turn provides for a more steady and improved ground speed with more crop harvested each day and less loss of time over the harvest period
    • A smaller barrel with taller flighting creates a huge gap for pulling through bulky crops: ideal to help eliminate blockages and plugging
    • Less flighting and more fingers, so the full width of the drum is used
    • Turbodrum’s unique patented paddle flights prevent repeating by eliminating the usual “dead zone” under the drum
    • A large diameter, fully welded crankshaft: extra strength where you need it
    • Infinitely adjustable finger timing to suit any condition for crop flexibility
    • Eliminates the problematic and unnecessary reverse clutch by not blocking
    • Field-fitted, clamp-on retractable finger holders
    • Extends the life of the rest of your expensive machine by reducing shock loading and plugging
    • Easy installation with clear instructions provided

    WARRANTY
    The manufacturer warrants this Product against defects in materials and workmanship under ordinary use for one year from the date of purchase by the end user. During the warranty period, if a defect arises in the Product and you follow the instructions that the Manufacturer provides for returning the Product, the Manufacturer will, at their option, take one of the following actions: (a) replace the Product with either a new or a refurbished Product that is the same as or similar to the Product you purchased; (b) repair the Product using either new or refurbished parts; or (c) refund to you the purchase price of the Product.

    The Warranty does not cover the following:
    • Failure or damage resulting from misuse, abuse, accident, modification, natural disasters, improper maintenance, or use not in accordance with the product instructions
    • Products or parts with an altered or missing identification label.

    $7,969.50
    Add to Wish List
  • HONEY BEE DRUM

    Part number TDR300X1820

    HONEY BEE DRUM

    What is a Turbodrum? Turbodrum is a heavy duty, high-capacity, retrofit feed drum for draper headers to replace the existing, standard feeder drum on draper heads. It comes complete with all internal components fully welded and assembled, ready to go. Just pull out your existing feed drum, then slip-in and install a Turbodrum - it’s that easy. Turbodrum is an instant fix to problems such as slow harvest speeds in bulky crops, and even worse, blockages and breakdowns caused by the standard feed drum. Turbodrum allows you to go faster and get the crop off in less time at less cost. It feeds better and it’s reliable. Fitting the Turbodrum is quicker than fixing your original. Increase performance and efficiency and reduce loss of crop value.

    KEY FEATURES
    • More than double the number of retractable fingers with a far more aggressive pattern. It literally grabs the crop and pulls it through in a constant and steady flow so the load to the rotor/drum can be optimal. This in turn provides for a more steady and improved ground speed with more crop harvested each day and less loss of time over the harvest period
    • A smaller barrel with taller flighting creates a huge gap for pulling through bulky crops: ideal to help eliminate blockages and plugging
    • Less flighting and more fingers, so the full width of the drum is used
    • Turbodrum’s unique patented paddle flights prevent repeating by eliminating the usual “dead zone” under the drum
    • A large diameter, fully welded crankshaft: extra strength where you need it
    • Infinitely adjustable finger timing to suit any condition for crop flexibility
    • Eliminates the problematic and unnecessary reverse clutch by not blocking
    • Field-fitted, clamp-on retractable finger holders
    • Extends the life of the rest of your expensive machine by reducing shock loading and plugging
    • Easy installation with clear instructions provided

    WARRANTY
    The manufacturer warrants this Product against defects in materials and workmanship under ordinary use for one year from the date of purchase by the end user. During the warranty period, if a defect arises in the Product and you follow the instructions that the Manufacturer provides for returning the Product, the Manufacturer will, at their option, take one of the following actions: (a) replace the Product with either a new or a refurbished Product that is the same as or similar to the Product you purchased; (b) repair the Product using either new or refurbished parts; or (c) refund to you the purchase price of the Product.

    The Warranty does not cover the following:
    • Failure or damage resulting from misuse, abuse, accident, modification, natural disasters, improper maintenance, or use not in accordance with the product instructions
    • Products or parts with an altered or missing identification label.

    $7,072.04
    Add to Wish List
  • JD DRUM 600D

    Part number TDR300X1284

    JD DRUM 600D

    What is a Turbodrum? Turbodrum is a heavy duty, high-capacity, retrofit feed drum for draper headers to replace the existing, standard feeder drum on draper heads. It comes complete with all internal components fully welded and assembled, ready to go. Just pull out your existing feed drum, then slip-in and install a Turbodrum - it’s that easy. Turbodrum is an instant fix to problems such as slow harvest speeds in bulky crops, and even worse, blockages and breakdowns caused by the standard feed drum. Turbodrum allows you to go faster and get the crop off in less time at less cost. It feeds better and it’s reliable. Fitting the Turbodrum is quicker than fixing your original. Increase performance and efficiency and reduce loss of crop value.

    KEY FEATURES
    • More than double the number of retractable fingers with a far more aggressive pattern. It literally grabs the crop and pulls it through in a constant and steady flow so the load to the rotor/drum can be optimal. This in turn provides for a more steady and improved ground speed with more crop harvested each day and less loss of time over the harvest period
    • A smaller barrel with taller flighting creates a huge gap for pulling through bulky crops: ideal to help eliminate blockages and plugging
    • Less flighting and more fingers, so the full width of the drum is used
    • Turbodrum’s unique patented paddle flights prevent repeating by eliminating the usual “dead zone” under the drum
    • A large diameter, fully welded crankshaft: extra strength where you need it
    • Infinitely adjustable finger timing to suit any condition for crop flexibility
    • Eliminates the problematic and unnecessary reverse clutch by not blocking
    • Field-fitted, clamp-on retractable finger holders
    • Extends the life of the rest of your expensive machine by reducing shock loading and plugging
    • Easy installation with clear instructions provided

    WARRANTY
    The manufacturer warrants this Product against defects in materials and workmanship under ordinary use for one year from the date of purchase by the end user. During the warranty period, if a defect arises in the Product and you follow the instructions that the Manufacturer provides for returning the Product, the Manufacturer will, at their option, take one of the following actions: (a) replace the Product with either a new or a refurbished Product that is the same as or similar to the Product you purchased; (b) repair the Product using either new or refurbished parts; or (c) refund to you the purchase price of the Product.

    The Warranty does not cover the following:
    • Failure or damage resulting from misuse, abuse, accident, modification, natural disasters, improper maintenance, or use not in accordance with the product instructions
    • Products or parts with an altered or missing identification label.

    $7,431.63
    Add to Wish List
  • Inverter - iGen 2500

    Part number MISIGEN2500

    Inverter - iGen 2500

    2,500 Peak Watts, 2,200 Running Watts
    LED Display - Remaining Run Time, Output, Fuel Level, and Volts
    Fuel Efficient - Up to 10 Hour Run Time (1.0 gal)
    Super Quiet - Less Noise than Normal Conversation
    Safe for Electronics - Inverter Technology
    Light Weight - Only 48 lbs
    Dual USB Charging Ports
    3-Year Limited Warranty and Lifetime Technical Support

    $1,099.00
    Add to Wish List
  • Inverter - iGen 4500

    Part number MISIGEN4500

    Inverter - iGen 4500

    4,500 Peak Watts, 3,700 Running Watts
    RV and Camper Ready with 120V 30A Outlet (TT-30R)
    LED Display - Remaining Run Time, Output, Fuel Level, and Volts
    Fuel efficient - Up to 18 Hour Run Time (3.4 gal)
    Remote Start and Push Button Start (Key Fob Included)
    Very quiet – significantly less noise than a conventional generator
    Comes with Mounted Wheels and Telescoping Handle
    Dual USB Charging Ports
    3-Year Limited Warranty and Lifetime Technical Support

    $1,599.99
    Add to Wish List